How to Attach and Remove RV Awning Side Panels
RV awning side panels are vertical fabric screens that turn an open awning into a shaded, semi-enclosed space. Also called privacy screens, side walls or wind screens, they attach along the outer edge of a cassette or roller awning rather than the wall of the vehicle.
Many Australian travellers use them at caravan parks, bush camps and temporary roadside camps. They provide shade, privacy and some insect protection, making them especially useful around the campsite during the hot arvo.
Panels from Dometic, Fiamma, Carefree, Sunsetter and other manufacturers use different rails, clips, zips and tensioning systems. A panel that looks similar may still be unsuitable if its dimensions or fixing points do not match the awning.
Strong sunlight, coastal salt, red dust and sudden winds all affect awning screens. Iascl Window Treatment provides independent guidance rather than selling products or operating a service centre, so confirm fitment with the awning maker or an authorised dealer where needed.
What RV awning side panels do
Awning side panels hang from the leading edge of an extended awning and connect to the ground, a vertical support pole or a lower anchoring point. Full-height fabric creates a sheltered room, while shorter or mesh panels provide partial shade without blocking airflow.
They are not structural walls and should not be treated as protection against severe weather. Fabric can act like a sail when it catches a gust, particularly if the lower edge is poorly secured. Wind limits and permitted panel combinations should therefore follow the awning manufacturer’s instructions.
Match the panel to your awning
Measure the awning width, projection from the vehicle, valance drop and distance from the outer rail to the ground. Also check the number, spacing and type of attachment points. A universal-looking side screen may suit the fabric dimensions but still be incompatible with the awning’s rail profile.
Brand and model alone may not be enough, particularly with older or imported motorhomes. Check the awning label, manual and hardware before buying replacement parts. The Australian caravan market commonly mixes factory-fitted systems with aftermarket products sold through RV specialists, caravan dealers and online stores.
Inspect whether the awning already has a sidewall rail, vertical poles or factory provision for privacy screens. Drilling extra holes can weaken the awning casing or create leaks, so use existing fixings whenever possible.
Prepare before fitting or removal
Choose a flat, stable area with enough room to extend the awning safely. Set the parking brake, deploy stabilisers and keep the vehicle level. Avoid working beside moving traffic; Australia drives on the left, so a roadside setup needs extra clearance.
Clean the attachment rail and lower anchoring points with a soft brush and mild soap. Remove grit from zips and inspect fabric for UV fading, torn hems, perished elastic or damaged webbing. A basic kit may include a screwdriver, suitable hex keys, a tape measure, gloves and a lubricant approved for the zipper material.
Do not fit panels during strong winds or while the fabric is soaked. Wet material becomes heavy, and an unsecured screen can twist in a gust before it is properly tensioned.
Compare common fixing methods
The fixing method determines how the panel is installed, tensioned and removed. Always follow the instructions supplied with the specific awning and screen.
| Fixing method | How it attaches | Common use | Main consideration |
|---|---|---|---|
| Zip-and-rail | Upper hooks engage the awning rail before the zipped edge is closed | Full-height privacy panels | Zip alignment must be correct |
| Hook-and-loop | Velcro-style strips wrap around the rail or support pole | Lightweight fabric screens | Hooks can collect dust and lint |
| Clip-and-tension | Clips secure the top while straps or elastic tension the sides | Adjustable side walls | Check clips and tension points regularly |
Zip-and-rail systems generally provide the neatest result, but all three need intact hardware. Replace stretched elastic, missing clips or damaged fasteners rather than using improvised ties that could release unexpectedly.
Attach the side panels safely
Extend the awning fully and lock or stabilise it in its normal position. Read the awning manual because the operating sequence varies. For most systems, the panel is attached while the awning is extended, then the lower edge is tensioned.
Secure the upper corner fixings first and work across the awning without dragging the fabric. Connect any vertical poles or lower anchoring straps before closing the zips completely. Pull the lower edge straight and apply light, even tension; excessive tightening can distort the panel, strain seams or bend lightweight fittings.
Walk around the awning and check that no fabric is caught beneath the roller, support arms or cassette. Leave enough room for the awning to move within its designed limits. Never retract a powered awning while side panels remain fitted unless the manufacturer specifically permits it, as fabric can wind into the mechanism.
Remove the panels without damage
Start with the lower connection points. Release tension straps, unclip ground anchors and remove vertical poles where applicable. Support the panel as its weight comes free so it does not pull against the upper hooks or tear at the hem.
Open the zips slowly, keeping the fabric clear of the teeth. If a zip will not move, check for fabric trapped in the slider or a misaligned flap rather than forcing it. Do not pull the panel sideways across the awning, because that can abrade the powder-coated finish.
Once detached, shake out loose dust and brush away insects. Fold loosely along the seams or roll the panel as its design recommends. Retract the awning only after all panels, straps and poles are completely clear.
Store, inspect and get camp-ready
Let damp panels dry completely before storage to prevent mildew and permanent stains. Coastal campers near the Gold Coast, Port Lincoln or Tasmania should rinse off salt with fresh water, while trips around Uluru can leave fine red dust lodged in seams and zips.
Before the next camp, photograph the panel layout, mark each fixing point and check the awning, zips, poles and straps. Store the panels in a breathable bag away from sharp tools and prolonged sunlight. A careful check now will help your awning side panels fit properly, stay secure and provide useful shade at your next Australian campsite.